Polaris UTV Lonestar Racing carries custom performance Polaris RZR Parts and Accessories.

RZR Engine & Performance

• Procom CDI Computer - RZR  (CDI-RZR1) The Procom FULLY Reprogrammable High performance ECU+EFI (2 in 1) Application: POLARIS RZR 800 (Year 08-10) This unit comes with super powerful pc-programming operation software. You can map your own fuel maps, timing maps, TPS maps and much more... This unit allow you to increases/decreases your REV. Limit up to 2500RPM. This unit allow you to gain all kind of your desired performance. This unit allow you to  increase the fuel up to 80%. This unit allow you  to advance the timing up to 32 degree. This unit  is already pre-mapped, just plug in and go unless you want make your own desired maps. Procom has the only 2 in 1 high performance ECU. It is not a Piggyback, It is a direct plug in unit. ADD TO YOUR SHOPPING CART       BASE PRICE: $299.00 QTY:

• Big Gun Complete Exhaust - RZR  (BG-127803) (07-09) Polaris RZR 800 Complete Exhaust-EVO SPORT UTILITY-94-96db's state park legal w/use of vortex insert (included)-USFS forestry approved screen type removable spark arrestor-.049-304 stainless steel pipe construction with brushed finish-6061 aluminum silencer housing-black hard anodized muffler-thermal dispersement (black) coated end tip. Dissipates exhaust heat-New slip fit design prevents cracking exhaust systems by allowing movement between mid pipe and silencer due to sub-frame movement-cnc billet aluminum outlet end cap-6 month Big Gun warranty ADD TO YOUR SHOPPING CART       BASE PRICE: $550.00 QTY:

• UMP Aluminum Air Box - RZR  (UMP-RZRAIR) This is a canister style intake system, It is a full replacement for the factory intake system. 80% increased air flow as compared to single inlet filter systems. Inlet Ports give 80% Flow Efficiency, Velocity fins remove up to 85% of the incoming dust before it reaches the filter. No oil required on the filter element, which can cause damage to engine sensors. Donaldson Filter element removes up to 99.99% of the remaining dust in the air before going into your expensive engine & components. Filter element is easily removed from either end. Filter end caps are machined from a single piece of high strength 6061-T6 billet aluminum. Not spun aluminum! Modular design, parts can be changed to increase or decrease the filter size. Some drilling & slight cutting required to mount filter inlet. Mounting clamps included. Spare filters elements also sold here. ADD TO YOUR SHOPPING CART       BASE PRICE: $329.00 QTY:

• Big Gun Complete Exhaust - RZR \"S\"  (BG-127812) (09) Polaris RZR 800 S Model Complete Exhaust-EVO SPORT UTILITY-94-96db's state park legal w/use of vortex insert (included)-USFS forestry approved screen type removable spark arrestor-.049-304 stainless steel pipe construction with brushed finish-6061 aluminum silencer housing-black hard anodized muffler-thermal disbursement (black) coated end tip. Dissipates exhaust heat-New slip fit design prevents cracking exhaust systems by allowing movement between mid pipe and silencer due to sub-frame movement-cnc billet aluminum outlet end cap-6 month Big Gun warranty ADD TO YOUR SHOPPING CART       BASE PRICE: $510.00 QTY:

• Pedal Spring - Rzr Gas Pedal  (51-1231220) This stiffer spring helps reduce the throttle chop when trying to hold a steady speed over rough terrain. It does make the initial startup and trailer a little more sensitive due to the clutch grab but overall is a recommended improvement. ADD TO YOUR SHOPPING CART       BASE PRICE: $15.95 QTY:

• RZR Motor Mount Insert Kit  (HPD-RZRMRA) The RZR Motor Mount Insert Kit from High Performance Designs does a great job of stiffening the mounts for racing without making them too stiff for general riding. Designed to become stiffer as they are deflected. Simple slip in installation. No complicated cutting or welding required to install. They are sold in sets of 3. ADD TO YOUR SHOPPING CART       BASE PRICE: $40.00 QTY:

RZR Suspension

• Lonestar Racing MTS +4 Suspension Kit with Elka Elite Shocks - Polaris RZR   MTS +4 Suspension kit with Elka Elite Shocks for the Polaris RZR MTS - Information 4" wider per side 1" rear placement in the back Up to 12.5" of wheel travel All tabs precision laser cut from certified 4130 alloy sheet TIG welded from large diameter certified 4130 alloy tubing Fully engineered using 3D CAD modeling and analysis Extended Brake Lines Included Mounts for OEM sway bars Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit comes with the arms, brake lines, tie-rod extenders. This kit is compatible with all stock wheels and body panels. Some fender trimming may be required depending on size of tires. It does use the stock ball joints and pivot hardware you already have. (Ball joints sold separately if needed.)  Elka Elite Suspension Information Elite Suspension System - Best suspension kit Elka offers! Dual Rate Spring Elite Preload, Compression and Rebound Adjustable ADD TO YOUR SHOPPING CART       BASE PRICE: $4,575.00 QTY:

• Lonestar Racing XTR +8 Suspension Kit with Elka Elite Shocks - Polaris RZR   XTR +8 Suspension kit with Elka Elite Shocks for the Polaris RZR XTR-Information 8" wider a-arms per side .5" forward placement 1.5" rear placement in the back Up to 16.5" of wheel travel New shock mounts front and rear for optimum shock geometry Bolt on or weld on strenghtening plates 4130 Laser cut tabs and plates Certified 4130 tubing TIG welded Extended Brake Lines Included Mounts for OEM sway bar in the rear Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit includes all a-arms, your choice of axles, brake lines, and bolt on frame supports. The kit uses two raised shock towers that also bolt onto the chassis. Some of the OEM pivot hardware will be reused along with the ball joints. The front lower a-arms have dual pivot mounts to the chassis for more strength. The mounting plate can be bolted on or welded for the hardcore racer. All extra mounting plates and gussets included can be bolted on (drilling required) or welded on for maximum strength.  This kit will take some extra time to install due to all of the extra mounting hardware. Some drilling is required Elka Elite Suspension Information Elite Suspension System - Best suspension kit Elka offers! Dual Rate Spring Elite Preload, Compression and Rebound Adjustable ADD TO YOUR SHOPPING CART       BASE PRICE: $6,190.00 QTY:

• Lonestar Racing XTR +8 Suspension Kit with Elka Elite Shocks - Polaris RZR S   XTR +8 Suspension kit with Elka Elite Shocks for the Polaris RZR XTR-Information 8" wider a-arms per side .5" forward placement 1.5" rear placement in the back Up to 16.5" of wheel travel New shock mounts front and rear for optimum shock geometry Bolt on or weld on strenghtening plates 4130 Laser cut tabs and plates Certified 4130 tubing TIG welded Extended Brake Lines Included Mounts for OEM sway bar in the rear Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit includes all a-arms, your choice of axles, brake lines, and bolt on frame supports. The kit uses two raised shock towers that also bolt onto the chassis. Some of the OEM pivot hardware will be reused along with the ball joints. The front lower a-arms have dual pivot mounts to the chassis for more strength. The mounting plate can be bolted on or welded for the hardcore racer. All extra mounting plates and gussets included can be bolted on (drilling required) or welded on for maximum strength.  This kit will take some extra time to install due to all of the extra mounting hardware. Some drilling is required Elka Elite Suspension Information Elite Suspension System - Best suspension kit Elka offers! Dual Rate Spring Elite Preload, Compression and Rebound Adjustable ADD TO YOUR SHOPPING CART       BASE PRICE: $6,190.00 QTY:

• Suspension - Mts +4 - Polaris Rzr  (51-1032) Features 4" wider a-arms per side 1" rear placement in the back Up to 12.5" of wheel travel 4130 Laser cut tabs and plates 4130 tubing TIG welded Extended Brake Lines Included Mounts for OEM sway bars Lifetime Warranty Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit comes with the arms, brake lines, tie-rod extenders, and your choice of axles. This kit is compatible with all stock wheels and body panels. Some fender trimming may be required depending on size of tires. It does use the stock ball joints and pivot hardware you already have. (Ball joints sold separately if needed.) This suspension kit is designed to work with stock length shocks that are valved and sprung specifically for this kit. Click below for a video of this kit in action! ADD TO YOUR SHOPPING CART       Colors No Finish Custom Powder Coat Color ($280.00) - Part #1 Chrome ($1100.00) - Part #2 RZR Red ($280.00) - Part #3 Flat black ($280.00) - Part #4 Silver Metallic ($280.00) - Part #5 Gloss Black ($280.00) - Part #1 Axle Options No Axles - (Must purchase Gorilla) LSR Axle Shafts ($250.00) - Part #1 BASE PRICE: $1,970.00 QTY:

• Suspension -xtr +8 Long Travel - Rzr  (51-1031) Features 8" wider a-arms per side .5" forward placement 1.5" rear placement in the back Up to 16.5" of wheel travel New shock mounts front and rear for optimum shock geometery Bolt on or weld on strenghtening plates 4130 Laser cut tabs and plates Certified 4130 tubing TIG welded Extended Brake Lines Included Mounts for OEM sway bar in the rear Lifetime Warranty Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit includes all a-arms, your choice of axles, brake lines, and bolt on frame supports. The kit uses two raised shock towers that also bolt onto the chassis. Some of the OEM pivot hardware will be reused along with the ball joints. The front lower a-arms have dual pivot mounts to the chassis for more strength. The mounting plate can be bolted on or welded for the hardcore racer. All extra mounting plates and gussets included can be bolted on (drilling required) or welded on for maximum strength. This kit will take some extra time to install due to all of the extra mounting hardware. Some drilling is required Testing is done and kits are now shipping This is the kit that will bring home the trophy from the race track! More photos coming soon! Click below for a video of this kit in action! ADD TO YOUR SHOPPING CART       Suspension Finish No Finish RZR Red ($300.00) - Part #3 Chrome ($1100.00) - Part #2 Flat Black ($300.00) - Part #4 Gloss Black ($300.00) - Part #1 Silver Metallic ($300.00) - Part #5 Custom Color ($300.00) - Part #1 Axles No Axles - (Must purchase Gorilla) Lone Star Axle shafts ($250.00) - Part #1 Model Standard Model S - Model - Part #S BASE PRICE: $3,650.00 QTY:

• Shocks - Elka For Rzr Mts +4  (EF-521) Valved and balanced for the Lone Star Racing +4" MTS RZR suspension. ADD TO YOUR SHOPPING CART       Adjustability Preload With Resivoirs - Part #11 Preload & Rebound With Resivoirs ($720.00) - Part #21 Preload, Compression & Reb. With Resivoirs ($780.00) - Part #31 Elite Hi/low Compression, Rebound, & Pre. ($1885.00) - Part #41 BASE PRICE: $1,990.00 QTY:

• Shocks - Elka For Rzr Xtr +8  (EF-522) For the most options of adjustability, Elka Suspension has it! These shocks are made specifically for the Lone Star Racing XTR +8 RZR Suspension Kit. ADD TO YOUR SHOPPING CART       Adjustability Preload Only - Remote Resivoir - Part #11 Preload & Rebound - Remote Resivoir ($750.00) - Part #21 Preload, Rebound & Compression - Piggy Front, Remote Rear ($1650.00) - Part #31 Elite Preload, Rebound & Compression - Piggy Back Resivoir ($1400.00) - Part #41 BASE PRICE: $1,990.00 QTY:

• Shocks - Fox for RZR  (FX-99) Valved and balanced for the Lone Star Racing +4" MTS RZR suspension. ADD TO YOUR SHOPPING CART       Suspension Kit MTS +4 - Part #1 XTR +8 - Part #2 Adjustability Preload Only - Part #21 DSC Compression & Preload ($300.00) - Part #31 RC2 Preload, Compression, & Rebound ($600.00) - Part #41 Shocks Color Black Body / Silver Spring - Part #2 BASE PRICE: $1,600.00 QTY:

• Shocks - Bilstein For Rzr +4  (BIL-MTS-05) Valved and balanced for Lone Star Racing +4" MTS suspension. Bilstein feature internal reservoirs. ADD TO YOUR SHOPPING CART       BASE PRICE: $1,975.00 QTY:

• Replacement Axle Shafts - Polaris RZR +4  (75-51SUS) These are the individual axles from the Lone Star Racing suspension kits. Lone Star Racing offers a lifetime warranty on our axles to the original purchaser of the kit. If you are the original purchaser you may call for a return authorization number to get your axle warranted. Otherwise we do offer the axles sold individually. Measurements: MTS +4 Axle Lengths Front Axles = 20.175" Rear Axles = 17.77" XTR +8 Axle Lengths Front Axles = 23.875" Rear Axles = 21.50" "S" Model Rear = 21.35" ADD TO YOUR SHOPPING CART       Axle Needed +4 Front - Part #110 +4 Rear - Part #111 +8 Front ($10.00) - Part #136 +8 Rear ($10.00) - Part #137 +8 S Model Rear ($10.00) - Part #204 BASE PRICE: $115.00 QTY:

• Turner Cycles Axle Kits - Polaris RZR  (TA-AXLEPR) The Turner Cycles axle kits are the most advanced superior axle upgrade from the OEM C/V joints and axle assembly. They feature a larger diameter specially heat treated axle shaft and larger more advanced C/V joints to give your Side X Side the drive-train  strength it requires for aggressive use. Axle kits are completely assembled and greased for simple installation. No other modifications are needed for installation however in rare cases depending on the shocks used, the rear shocks may need to be spaced away from the axle to accommodate the larger diameter shaft.  This will not affect the performance nor strength. Check clearances before driving. ADD TO YOUR SHOPPING CART       Axles Needed RZR +8 Complete Set ($1840.00) - Part #8 RZR +8 Rear Only ($920.00) - Part #82 RZR +4 Complete Set ($1840.00) - Part #4 RZR +4 Rear Only ($920.00) - Part #42 BASE PRICE: $115.00 QTY:

• Electra Steer Powersteering Kit Polaris RZR  (US-8051) Electra-Steer™ assist steering is the newest technology being used by the major automotive manufactures to replace hydraulic power steering and is now available to UTV enthusiasts. These units consist of an electric column and power control module that utilizes state of the art electronics. The result is significant reduction of manual steering effort. Electra-Steer™ is fast and easy to install. All kits include everything needed to simply bolt the unit onto the existing equipment. Basic hand tools are all that is typically needed. Electra-Steer™ is then connected to your 12-volt power source and you are ready to hit the trail. If you ever wanted an easier way to steer your UTV, this is the best set up. It will greatly help to reduce fatigue during those long rides, and in racing situations. You will be able to throw around your rhino easily with one hand, even in the sand! We use and recommend these kits on all of our racing UTVs for the best performance, and comfort! ADD TO YOUR SHOPPING CART       Model Year 2007 Model - Part #590 2009-2010 RZR - Part #730 BASE PRICE: $995.00 QTY:

• RackZilla Steering Rack for Polaris RZR  (US-8001) Here is a replacement heavy duty Rack and Pinion Steering Rack from UniSteer It is designed to replace the factory steering rack all the way to the spindles. Please choose the correct model for your application below. It is backed by a limited lifetime warranty as well. If you don't see the correct application in the drop down below, please call in, so we can special order it for your a-arm length. ADD TO YOUR SHOPPING CART       Model 2008 RZR - Part #130 2009-2010 RZR - Part #280 2009-2010 RZR S - Part #270 BASE PRICE: $439.00 QTY:

• RZR Steering Rack End  (75-51SUS16) The steering rack end could also be considered the tie-rod. It threads into the steering rack and extends out to the tie rod end. The LSR rack end was designed using a heavier grade steel with a larger ball diameter and increased taper to give it superior strength over the OEM parts. However the rack end is still designed to give under extreme force to help prevent the steering rack from breaking.   *Stock width rack end works with all stock or aftermarket suspension widths. *+8 width rack end is designed for the LSR XTR +8 kit ADD TO YOUR SHOPPING CART       Width Stock - Part #4 +8 ($10.00) - Part #5 BASE PRICE: $45.00 QTY:

• Frame Gusset Kit - Polaris Rzr  (51-133010) Weld on gusset kit for the Polaris RZR. Strengthens the suspension mounting points as well as the front suspension cross braces. CLICK HERE for Install Guide ADD TO YOUR SHOPPING CART       BASE PRICE: $125.00 QTY:

• RZR Rear OEM Shock Mount Support  (51-13304) This plate can either be bolted in or welded in place. It mounts on the back side of the OEM upper rear shock mount to prevent flexing or folding over of the shock tabs under heavy riding conditions or when using aftermarket suspension. Will not work with the LSR +8 suspension kit. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Flat Black ($15.00) - Part #3 Flame Red ($15.00) - Part #4 Silver Metallic ($15.00) - Part #5 Custom Color ($15.00) - Part #1 BASE PRICE: $60.00 QTY:

• RZR Front Upper Frame Support  (51-13303) This plate bolts or welds in across the two frame rails seperating the upper a-arm mounts. This prevents the frame from twisting or collapsing under heavy riding conditions or when using aftermarket suspension. The kit is available in bare steel to be welded in or powder coated for bolt in applications. All hardware is included. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Flat Black ($25.00) - Part #3 Flame Red ($25.00) - Part #4 Silver Metallic ($25.00) - Part #5 Custom Color ($25.00) - Part #1 BASE PRICE: $50.00 QTY:

RZR Cages & Bumpers

• Rear Bumper - Race Style - RZR  (51-113131) The RZR race rear bumper is designed to work with the LSR race roll cage. It features two mounting bosses to conect to the cage so the rear end is supported. The lower part of the bumper has an integrated gusset plate to strengthen the a-arm mounts and prevent frame flex. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Custom Color ($70.00) - Part #1 Flat Black ($70.00) - Part #2 Silver Metallic ($70.00) - Part #3 Flame Red ($70.00) - Part #4 Gloss Black ($70.00) - Part #5 BASE PRICE: $385.00 QTY:

• Roll Cage - Rzr  (51-113112) This cage is made from 1-3/4" DOM steel and mounts to stock chassis locations. The two rear mounts do require some drilling into the plastic bed. The drivers side is pre drilled to run wiring. Rear whip and light mounts are included. Two foam roll bar pads with black canvas covers are also included to protect your head from the side tubes since the car is a little on the narrow side. Aftermarket seat belts are required. ADD TO YOUR SHOPPING CART       Finish Bare Steel Custom Color Powder Coat ($250.00) - Part #1 BASE PRICE: $1,600.00 QTY:

• Roll Cage - Race Style - RZR  (51-1131122) The RZR race cage is the same basic design as the standard cage but ties into the race rear bumper instead of the bed of the vehicle. The cage also has optional side support bars for adding panels and protecting the riders in case of a roll over. The cage is made from 1 3/4" Dom steel and mounts onto the factory cage locations. Race rear bumper and side panels sold seperately. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Powder Coated ($250.00) - Part #1 BASE PRICE: $2,250.00 QTY:

• Canvas Roll Cage Top - Rzr  (51-1131121T) These canvas tops are designed for the Lone Star cages. They install with velcro straps around the cage tubing. They can be ordered with additional cutouts if you are using different lights or accessories on the cage. ADD TO YOUR SHOPPING CART       Cage Style Standard Setup Custom Options ( Specify) ($20.00) BASE PRICE: $335.00 QTY:

• Front Bumper - Rzr  (51-1131221) This trick new RZR front bumper is made from DOM steel. It features light mounts (will fit up to 5" diameter lights)and a wrap around lower plate to help protect the RZR chassis. Bolts to factory locations for no drilling installation. The bumper is relatively light weight so it won't slow you down! They now include billet aluminum end caps (not shown). ADD TO YOUR SHOPPING CART       Bumper Finish No Finish ($68.00) Custom Color ($68.00) - Part #1 Flat Black ($68.00) - Part #2 Flame Red ($68.00) - Part #4 Gloss Black ($68.00) - Part #5 BASE PRICE: $447.00 QTY:

• Front Bumper - Race Style - RZR  (51-1131222) The RZR race style front bumper features two extra support bars that stretch back under the fenders and connect to the main chassis. This adds extra support for the front bumper to protect the radiator. The bumpers are made from 4130 chromoly steel. No cutting or welding required. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Custom Color ($70.00) - Part #1 Flat Black ($70.00) - Part #2 Silver Metallic ($70.00) - Part #3 Flame Red ($70.00) - Part #4 Gloss Black ($70.00) - Part #5 BASE PRICE: $580.00 QTY:

• Rear Bumper - Rzr  (51-11313) The RZR rear bumper is made from DOM steel and tig weleded for superior looks and strength. This bumper bolts to the a-arm mounts and has the frame gusset plate incorporated into the mount. Bolts to factory locations for no drilling installation. The bumper is relatively light weight so it won't slow you down! They now include billet aluminum end caps (not shown). ADD TO YOUR SHOPPING CART       License Plate Mounts No - Part #2 Yes ($13.00) - Part #3 Bumper Finish Bare Steel ($68.00) Custom Color ($68.00) - Part #1 Flat Black ($68.00) - Part #2 Silver Metallic ($68.00) - Part #3 Flame Red ($68.00) - Part #4 Gloss Black ($68.00) - Part #5 BASE PRICE: $327.00 QTY:

• Roll Cage Seat Belts - Simpson  (SIM-1B11P) All aftermarket roll cages require new seat belts. We prefer the Simpson belts for the quality and comfort. All belts are padded 5 point systems. Belts mount to the roll cage and stock lower seat belt locations. ADD TO YOUR SHOPPING CART       Colors Red - Part #IR Blue - Part #IB Black - Part #IP Platinum ( Silver) ($20.00) - Part #IK BASE PRICE: $99.00 QTY:

• Cooler Mount - Rzr  (51-11314) The chromoly cooler mount provides a secure and clean way to hold a cooler in the RZR. It is made from 1" tubing and uses the RZR lock holes to secure it to the bed. Included are 4 Billet Locks that are tightened with an hex (allen) wrench to lock the mount to the bed. The OEM Polaris Lock N Ride mounts are compatable, and can be purchased seperately. The cooler mount is available with or without the 48 quart cooler and strap. ADD TO YOUR SHOPPING CART       Include Cooler No Thanks Yes - Red ($30.00) - Part #1 Finish Options No Finish Custom Color ($40.00) - Part #1 Chrome ($200.00) - Part #2 Flat Black ($40.00) - Part #3 Flame Red ($40.00) - Part #4 Gloss Black ($40.00) - Part #5 Silver Metallic ($40.00) - Part #6 BASE PRICE: $260.00 QTY:

• Rear Main Gusset Plate -rzr  (51-13302) The rear main gusset plates are one of the most important products for UTV's. They strengthen the chassis from flexing and stabalize the rear differential. The heavy duty chromoly plate also strengthens the a-arm tabs. Kit uses the stock bolts and comes with new nuts. ADD TO YOUR SHOPPING CART       Plate Finish Bare Steel Custom Color ($20.00) - Part #1 Chrome ($120.00) - Part #2 Flat Black ($20.00) - Part #3 Flame Red ($20.00) - Part #4 Gloss Black ($20.00) - Part #5 Silver Metallic ($20.00) - Part #6 BASE PRICE: $80.00 QTY:

RZR Accessories

• Rear Main Gusset Plate -rzr  (51-13302) The rear main gusset plates are one of the most important products for UTV's. They strengthen the chassis from flexing and stabalize the rear differential. The heavy duty chromoly plate also strengthens the a-arm tabs. Kit uses the stock bolts and comes with new nuts. ADD TO YOUR SHOPPING CART       Plate Finish Bare Steel Custom Color ($20.00) - Part #1 Chrome ($120.00) - Part #2 Flat Black ($20.00) - Part #3 Flame Red ($20.00) - Part #4 Gloss Black ($20.00) - Part #5 Silver Metallic ($20.00) - Part #6 BASE PRICE: $80.00 QTY:

• RZR Steering Rack End  (75-51SUS16) The steering rack end could also be considered the tie-rod. It threads into the steering rack and extends out to the tie rod end. The LSR rack end was designed using a heavier grade steel with a larger ball diameter and increased taper to give it superior strength over the OEM parts. However the rack end is still designed to give under extreme force to help prevent the steering rack from breaking.   *Stock width rack end works with all stock or aftermarket suspension widths. *+8 width rack end is designed for the LSR XTR +8 kit ADD TO YOUR SHOPPING CART       Width Stock - Part #4 +8 ($10.00) - Part #5 BASE PRICE: $45.00 QTY:

• Electra Steer Powersteering Kit Polaris RZR  (US-8051) Electra-Steer™ assist steering is the newest technology being used by the major automotive manufactures to replace hydraulic power steering and is now available to UTV enthusiasts. These units consist of an electric column and power control module that utilizes state of the art electronics. The result is significant reduction of manual steering effort. Electra-Steer™ is fast and easy to install. All kits include everything needed to simply bolt the unit onto the existing equipment. Basic hand tools are all that is typically needed. Electra-Steer™ is then connected to your 12-volt power source and you are ready to hit the trail. If you ever wanted an easier way to steer your UTV, this is the best set up. It will greatly help to reduce fatigue during those long rides, and in racing situations. You will be able to throw around your rhino easily with one hand, even in the sand! We use and recommend these kits on all of our racing UTVs for the best performance, and comfort! ADD TO YOUR SHOPPING CART       Model Year 2007 Model - Part #590 2009-2010 RZR - Part #730 BASE PRICE: $995.00 QTY:

• RackZilla Steering Rack for Polaris RZR  (US-8001) Here is a replacement heavy duty Rack and Pinion Steering Rack from UniSteer It is designed to replace the factory steering rack all the way to the spindles. Please choose the correct model for your application below. It is backed by a limited lifetime warranty as well. If you don't see the correct application in the drop down below, please call in, so we can special order it for your a-arm length. ADD TO YOUR SHOPPING CART       Model 2008 RZR - Part #130 2009-2010 RZR - Part #280 2009-2010 RZR S - Part #270 BASE PRICE: $439.00 QTY:

• Cooler Mount - Rzr  (51-11314) The chromoly cooler mount provides a secure and clean way to hold a cooler in the RZR. It is made from 1" tubing and uses the RZR lock holes to secure it to the bed. Included are 4 Billet Locks that are tightened with an hex (allen) wrench to lock the mount to the bed. The OEM Polaris Lock N Ride mounts are compatable, and can be purchased seperately. The cooler mount is available with or without the 48 quart cooler and strap. ADD TO YOUR SHOPPING CART       Include Cooler No Thanks Yes - Red ($30.00) - Part #1 Finish Options No Finish Custom Color ($40.00) - Part #1 Chrome ($200.00) - Part #2 Flat Black ($40.00) - Part #3 Flame Red ($40.00) - Part #4 Gloss Black ($40.00) - Part #5 Silver Metallic ($40.00) - Part #6 BASE PRICE: $260.00 QTY:

• RZR Motor Mount Insert Kit  (HPD-RZRMRA) The RZR Motor Mount Insert Kit from High Performance Designs does a great job of stiffening the mounts for racing without making them too stiff for general riding. Designed to become stiffer as they are deflected. Simple slip in installation. No complicated cutting or welding required to install. They are sold in sets of 3. ADD TO YOUR SHOPPING CART       BASE PRICE: $40.00 QTY:

• RZR Rear Differential Housing Kit  (HPD-RZRDHK) These new housings from High Performance Designs are cast from 356 aged and heat treated aluminum. This alone would make them twice as strong as the die cast originals. They are a minimum of 30% thicker and at least twice as thick in the pinion to output areas. It is highly unlikely that these housings will break, unlike the weak stock housings, in which we have seen plenty of them broken. ADD TO YOUR SHOPPING CART       BASE PRICE: $650.00 QTY:

• Pedal Spring - Rzr Gas Pedal  (51-1231220) This stiffer spring helps reduce the throttle chop when trying to hold a steady speed over rough terrain. It does make the initial startup and trailer a little more sensitive due to the clutch grab but overall is a recommended improvement. ADD TO YOUR SHOPPING CART       BASE PRICE: $15.95 QTY:

• Frame Gusset Kit - Polaris Rzr  (51-133010) Weld on gusset kit for the Polaris RZR. Strengthens the suspension mounting points as well as the front suspension cross braces. CLICK HERE for Install Guide ADD TO YOUR SHOPPING CART       BASE PRICE: $125.00 QTY:

• RZR Front Upper Frame Support  (51-13303) This plate bolts or welds in across the two frame rails seperating the upper a-arm mounts. This prevents the frame from twisting or collapsing under heavy riding conditions or when using aftermarket suspension. The kit is available in bare steel to be welded in or powder coated for bolt in applications. All hardware is included. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Flat Black ($25.00) - Part #3 Flame Red ($25.00) - Part #4 Silver Metallic ($25.00) - Part #5 Custom Color ($25.00) - Part #1 BASE PRICE: $50.00 QTY:

• RZR Rear OEM Shock Mount Support  (51-13304) This plate can either be bolted in or welded in place. It mounts on the back side of the OEM upper rear shock mount to prevent flexing or folding over of the shock tabs under heavy riding conditions or when using aftermarket suspension. Will not work with the LSR +8 suspension kit. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Flat Black ($15.00) - Part #3 Flame Red ($15.00) - Part #4 Silver Metallic ($15.00) - Part #5 Custom Color ($15.00) - Part #1 BASE PRICE: $60.00 QTY:

• Grill Insert - Rzr Hood  (51-1231011) The grill insert for the hood serves far more purpose than just great looks. The radiator is covered halfway by the stock grill and causes over heating. With the Lone Star grill you cut out the stock plastic grill and screw on the LSR stainless grill to cover the hole. This allows more air flow and prevents over heating. ADD TO YOUR SHOPPING CART       BASE PRICE: $55.00 QTY:

• Grill Insert - Rzr Intake  (51-1231111) The intake insert mounts right between the stock seats on the back panel. This entry allows more cool air to reach the engine intake and clutch system. This also helps the fresh air flow and keeps the heat generated by the motor flow down and out. ADD TO YOUR SHOPPING CART       BASE PRICE: $60.00 QTY:

• Pedal - Brake, Rzr  (51-123131) This heavy duty brake pedal is a great addition to the gas pedal. It is an all steel construction with a larger stomp pad and installs directly in place of the OEM pedal. ADD TO YOUR SHOPPING CART       Pedal Finish No Finish Custom Color ($20.00) - Part #1 Flat Black ($20.00) - Part #2 Chrome ($55.00) - Part #3 Flame Red ($20.00) - Part #4 BASE PRICE: $70.00 QTY:

• Pedal -gas, Rzr  (51-123121) This strong new gas pedal is made entirely of chromoly steel much stronger than the stock pedal. The pedal has a different profile that increases the spring tension using the same spring. This helps minimize the throttle chop from your foot tapping the pedal. The pedals bolt on with all exisitng hardware and no modifications necessary. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Custom Color ( please specify) ($20.00) - Part #1 Flat Black ($20.00) - Part #2 Chrome ($55.00) - Part #3 Flame Red ($20.00) - Part #4 Silver Metallic ($20.00) - Part #5 BASE PRICE: $60.00 QTY:

• Billet Battery Hold Down Strap - Rzr  (51-1231400) This billet battery bracket takes the place of the stock rubber strap that has been commonly coming loose. It bolts into the stock location using stock bolts and features rubber stops to prevent wear. This bracket only works on the models that use a rubber strap from the factory. There was a revision in the mid '08 model RZR that this will not fit. ADD TO YOUR SHOPPING CART       BASE PRICE: $40.00 QTY:

• Roll Cage Seat Belts - Simpson  (SIM-1B11P) All aftermarket roll cages require new seat belts. We prefer the Simpson belts for the quality and comfort. All belts are padded 5 point systems. Belts mount to the roll cage and stock lower seat belt locations. ADD TO YOUR SHOPPING CART       Colors Red - Part #IR Blue - Part #IB Black - Part #IP Platinum ( Silver) ($20.00) - Part #IK BASE PRICE: $99.00 QTY:

• UTV Door Sticker - Red on Black  (36-25) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is Red on Black. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

• UTV Door Sticker - White on Black  (36-21) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is White on Black. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

• UTV Door Sticker - Black on White  (36-22) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is Black on White. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

• UTV Door Sticker - Green on White  (36-23) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is Green on White. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

• UTV Door Sticker - Blue on White  (36-24) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is Blue on White. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

RZR Lighting

• Edge LED Light Bars  (28-16) E SERIES, HIGH INTENSITY LED LIGHT BAR. Light the way with the latest in LED technology. Brighter than most HID lights available. No warm-up. Fully dimmable. Extremely Durable! This will optimize both functional light spread and light distance for increased visability. Comes with a switch, fuse, relay, and harness. ADD TO YOUR SHOPPING CART       Light Bar Size 6 Inch ($280.00) - Part #1 10 Inch ($380.00) - Part #2 20 Inch ($680.00) - Part #3 30 Inch ($980.00) - Part #4 40 Inch ($1275.00) - Part #5 50 Inch ($1575.00) - Part #6 BASE PRICE: $10.00 QTY:

• Rzr Hid Headlight Conversion Kit  (HID-RZ063) These HID conversion kits plug right into the OEM headlight housings and come with all necessary hardware for installation. Kits are rated 3X brighter than the stock headlights with minimal power draw. ADD TO YOUR SHOPPING CART       BASE PRICE: $199.00 QTY:

RZR 170 Products

• +3 A-arms - Polaris RZR 170  (51-1062) The extended a-arms for the Polaris RZR 170 are 3" wider per side to give the mini a more stable ride. They are designed to work with the stock length shocks but aftermarket shocks are recommended for the best performance. The arms are made from 1" diameter 4130 chromoly steel and available in your many powder coat colors. The kit includes 2 lower a-arms, extended tie-rods, and extended brake lines. Features 9.5” of travel using 15.25” long shock, with 4.75” of stroke. (2:1 leverage ratio) 7.5” of Ground Clearance at Ride Height with a 21” front tire. 1” of ground clearance and full compression. ADD TO YOUR SHOPPING CART       Finish Options No Finish Custom Color ($50.00) - Part #1 Chrome ($139.00) - Part #2 Flame Red ($50.00) - Part #3 Flat Black ($50.00) - Part #4 Silver Metallic ($50.00) - Part #5 Gloss Black ($50.00) - Part #6 BASE PRICE: $495.00 QTY:

• Fox Float Front Shocks - RZR 170   The Fox Float front shocks are an excellent choice for the RZR 170. The Float shocks are use air pressure instead of springs so they are light weight and easily adjusted for different types of terrain. The front shocks come as a pair and designed for the 3" wider suspension. ADD TO YOUR SHOPPING CART       BASE PRICE: $695.00 QTY:

• Extended Axle - Polaris RZR 170  (51-106201) The extended axle shaft is lengthened 6" overall to match up with the +3 a-arms. The axle is machined from aircraft grade steel, heat treated, and chromed for strength and corrosion resistance. It installs using all of the factory components. ADD TO YOUR SHOPPING CART       BASE PRICE: $420.00 QTY:

• Fox Float Rear Shocks - RZR 170   The Fox Float front shocks are an excellent choice for the RZR 170. The Float shocks are use air pressure instead of springs so they are light weight and easily adjusted for different types of terrain. The rear shocks come as a pair and designed for the stock shock locations. ADD TO YOUR SHOPPING CART       BASE PRICE: $695.00 QTY:

• Big Gun Exhaust - RZR 170   The Big Gun exhaust gives the RZR 170 that deep throaty 4 stroke sound and increases the excelleration. The kit includes the head pipe and muffler.   (Actual product photo coming soon.) ADD TO YOUR SHOPPING CART       BASE PRICE: $279.00 QTY: