Polaris UTV » RZR Suspension

• Lonestar Racing MTS +4 Suspension Kit with Elka Elite Shocks - Polaris RZR   MTS +4 Suspension kit with Elka Elite Shocks for the Polaris RZR MTS - Information 4" wider per side 1" rear placement in the back Up to 12.5" of wheel travel All tabs precision laser cut from certified 4130 alloy sheet TIG welded from large diameter certified 4130 alloy tubing Fully engineered using 3D CAD modeling and analysis Extended Brake Lines Included Mounts for OEM sway bars Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit comes with the arms, brake lines, tie-rod extenders. This kit is compatible with all stock wheels and body panels. Some fender trimming may be required depending on size of tires. It does use the stock ball joints and pivot hardware you already have. (Ball joints sold separately if needed.)  Elka Elite Suspension Information Elite Suspension System - Best suspension kit Elka offers! Dual Rate Spring Elite Preload, Compression and Rebound Adjustable ADD TO YOUR SHOPPING CART       BASE PRICE: $4,575.00 QTY:

• Lonestar Racing XTR +8 Suspension Kit with Elka Elite Shocks - Polaris RZR   XTR +8 Suspension kit with Elka Elite Shocks for the Polaris RZR XTR-Information 8" wider a-arms per side .5" forward placement 1.5" rear placement in the back Up to 16.5" of wheel travel New shock mounts front and rear for optimum shock geometry Bolt on or weld on strenghtening plates 4130 Laser cut tabs and plates Certified 4130 tubing TIG welded Extended Brake Lines Included Mounts for OEM sway bar in the rear Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit includes all a-arms, your choice of axles, brake lines, and bolt on frame supports. The kit uses two raised shock towers that also bolt onto the chassis. Some of the OEM pivot hardware will be reused along with the ball joints. The front lower a-arms have dual pivot mounts to the chassis for more strength. The mounting plate can be bolted on or welded for the hardcore racer. All extra mounting plates and gussets included can be bolted on (drilling required) or welded on for maximum strength.  This kit will take some extra time to install due to all of the extra mounting hardware. Some drilling is required Elka Elite Suspension Information Elite Suspension System - Best suspension kit Elka offers! Dual Rate Spring Elite Preload, Compression and Rebound Adjustable ADD TO YOUR SHOPPING CART       BASE PRICE: $6,190.00 QTY:

• Lonestar Racing XTR +8 Suspension Kit with Elka Elite Shocks - Polaris RZR S   XTR +8 Suspension kit with Elka Elite Shocks for the Polaris RZR XTR-Information 8" wider a-arms per side .5" forward placement 1.5" rear placement in the back Up to 16.5" of wheel travel New shock mounts front and rear for optimum shock geometry Bolt on or weld on strenghtening plates 4130 Laser cut tabs and plates Certified 4130 tubing TIG welded Extended Brake Lines Included Mounts for OEM sway bar in the rear Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit includes all a-arms, your choice of axles, brake lines, and bolt on frame supports. The kit uses two raised shock towers that also bolt onto the chassis. Some of the OEM pivot hardware will be reused along with the ball joints. The front lower a-arms have dual pivot mounts to the chassis for more strength. The mounting plate can be bolted on or welded for the hardcore racer. All extra mounting plates and gussets included can be bolted on (drilling required) or welded on for maximum strength.  This kit will take some extra time to install due to all of the extra mounting hardware. Some drilling is required Elka Elite Suspension Information Elite Suspension System - Best suspension kit Elka offers! Dual Rate Spring Elite Preload, Compression and Rebound Adjustable ADD TO YOUR SHOPPING CART       BASE PRICE: $6,190.00 QTY:

• Suspension - Mts +4 - Polaris Rzr  (51-1032) Features 4" wider a-arms per side 1" rear placement in the back Up to 12.5" of wheel travel 4130 Laser cut tabs and plates 4130 tubing TIG welded Extended Brake Lines Included Mounts for OEM sway bars Lifetime Warranty Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit comes with the arms, brake lines, tie-rod extenders, and your choice of axles. This kit is compatible with all stock wheels and body panels. Some fender trimming may be required depending on size of tires. It does use the stock ball joints and pivot hardware you already have. (Ball joints sold separately if needed.) This suspension kit is designed to work with stock length shocks that are valved and sprung specifically for this kit. Click below for a video of this kit in action! ADD TO YOUR SHOPPING CART       Colors No Finish Custom Powder Coat Color ($280.00) - Part #1 Chrome ($1100.00) - Part #2 RZR Red ($280.00) - Part #3 Flat black ($280.00) - Part #4 Silver Metallic ($280.00) - Part #5 Gloss Black ($280.00) - Part #1 Axle Options No Axles - (Must purchase Gorilla) LSR Axle Shafts ($250.00) - Part #1 BASE PRICE: $1,970.00 QTY:

• Suspension -xtr +8 Long Travel - Rzr  (51-1031) Features 8" wider a-arms per side .5" forward placement 1.5" rear placement in the back Up to 16.5" of wheel travel New shock mounts front and rear for optimum shock geometery Bolt on or weld on strenghtening plates 4130 Laser cut tabs and plates Certified 4130 tubing TIG welded Extended Brake Lines Included Mounts for OEM sway bar in the rear Lifetime Warranty Now featuring Quick Caster to fine tuning steering feel! Easily adjustable from 3 to 7 degrees depending on your preference. The kit includes all a-arms, your choice of axles, brake lines, and bolt on frame supports. The kit uses two raised shock towers that also bolt onto the chassis. Some of the OEM pivot hardware will be reused along with the ball joints. The front lower a-arms have dual pivot mounts to the chassis for more strength. The mounting plate can be bolted on or welded for the hardcore racer. All extra mounting plates and gussets included can be bolted on (drilling required) or welded on for maximum strength. This kit will take some extra time to install due to all of the extra mounting hardware. Some drilling is required Testing is done and kits are now shipping This is the kit that will bring home the trophy from the race track! More photos coming soon! Click below for a video of this kit in action! ADD TO YOUR SHOPPING CART       Suspension Finish No Finish RZR Red ($300.00) - Part #3 Chrome ($1100.00) - Part #2 Flat Black ($300.00) - Part #4 Gloss Black ($300.00) - Part #1 Silver Metallic ($300.00) - Part #5 Custom Color ($300.00) - Part #1 Axles No Axles - (Must purchase Gorilla) Lone Star Axle shafts ($250.00) - Part #1 Model Standard Model S - Model - Part #S BASE PRICE: $3,650.00 QTY:

• Shocks - Elka For Rzr Mts +4  (EF-521) Valved and balanced for the Lone Star Racing +4" MTS RZR suspension. ADD TO YOUR SHOPPING CART       Adjustability Preload With Resivoirs - Part #11 Preload & Rebound With Resivoirs ($720.00) - Part #21 Preload, Compression & Reb. With Resivoirs ($780.00) - Part #31 Elite Hi/low Compression, Rebound, & Pre. ($1885.00) - Part #41 BASE PRICE: $1,990.00 QTY:

• Shocks - Elka For Rzr Xtr +8  (EF-522) For the most options of adjustability, Elka Suspension has it! These shocks are made specifically for the Lone Star Racing XTR +8 RZR Suspension Kit. ADD TO YOUR SHOPPING CART       Adjustability Preload Only - Remote Resivoir - Part #11 Preload & Rebound - Remote Resivoir ($750.00) - Part #21 Preload, Rebound & Compression - Piggy Front, Remote Rear ($1650.00) - Part #31 Elite Preload, Rebound & Compression - Piggy Back Resivoir ($1400.00) - Part #41 BASE PRICE: $1,990.00 QTY:

• Shocks - Fox for RZR  (FX-99) Valved and balanced for the Lone Star Racing +4" MTS RZR suspension. ADD TO YOUR SHOPPING CART       Suspension Kit MTS +4 - Part #1 XTR +8 - Part #2 Adjustability Preload Only - Part #21 DSC Compression & Preload ($300.00) - Part #31 RC2 Preload, Compression, & Rebound ($600.00) - Part #41 Shocks Color Black Body / Silver Spring - Part #2 BASE PRICE: $1,600.00 QTY:

• Shocks - Bilstein For Rzr +4  (BIL-MTS-05) Valved and balanced for Lone Star Racing +4" MTS suspension. Bilstein feature internal reservoirs. ADD TO YOUR SHOPPING CART       BASE PRICE: $1,975.00 QTY:

• Replacement Axle Shafts - Polaris RZR +4  (75-51SUS) These are the individual axles from the Lone Star Racing suspension kits. Lone Star Racing offers a lifetime warranty on our axles to the original purchaser of the kit. If you are the original purchaser you may call for a return authorization number to get your axle warranted. Otherwise we do offer the axles sold individually. Measurements: MTS +4 Axle Lengths Front Axles = 20.175" Rear Axles = 17.77" XTR +8 Axle Lengths Front Axles = 23.875" Rear Axles = 21.50" "S" Model Rear = 21.35" ADD TO YOUR SHOPPING CART       Axle Needed +4 Front - Part #110 +4 Rear - Part #111 +8 Front ($10.00) - Part #136 +8 Rear ($10.00) - Part #137 +8 S Model Rear ($10.00) - Part #204 BASE PRICE: $115.00 QTY:

• Turner Cycles Axle Kits - Polaris RZR  (TA-AXLEPR) The Turner Cycles axle kits are the most advanced superior axle upgrade from the OEM C/V joints and axle assembly. They feature a larger diameter specially heat treated axle shaft and larger more advanced C/V joints to give your Side X Side the drive-train  strength it requires for aggressive use. Axle kits are completely assembled and greased for simple installation. No other modifications are needed for installation however in rare cases depending on the shocks used, the rear shocks may need to be spaced away from the axle to accommodate the larger diameter shaft.  This will not affect the performance nor strength. Check clearances before driving. ADD TO YOUR SHOPPING CART       Axles Needed RZR +8 Complete Set ($1840.00) - Part #8 RZR +8 Rear Only ($920.00) - Part #82 RZR +4 Complete Set ($1840.00) - Part #4 RZR +4 Rear Only ($920.00) - Part #42 QTY:

• Electra Steer Powersteering Kit Polaris RZR  (US-8051) Electra-Steer™ assist steering is the newest technology being used by the major automotive manufactures to replace hydraulic power steering and is now available to UTV enthusiasts. These units consist of an electric column and power control module that utilizes state of the art electronics. The result is significant reduction of manual steering effort. Electra-Steer™ is fast and easy to install. All kits include everything needed to simply bolt the unit onto the existing equipment. Basic hand tools are all that is typically needed. Electra-Steer™ is then connected to your 12-volt power source and you are ready to hit the trail. If you ever wanted an easier way to steer your UTV, this is the best set up. It will greatly help to reduce fatigue during those long rides, and in racing situations. You will be able to throw around your rhino easily with one hand, even in the sand! We use and recommend these kits on all of our racing UTVs for the best performance, and comfort! ADD TO YOUR SHOPPING CART       Model Year 2007 Model - Part #590 2009-2010 RZR - Part #730 BASE PRICE: $995.00 QTY:

• RackZilla Steering Rack for Polaris RZR  (US-8001) Here is a replacement heavy duty Rack and Pinion Steering Rack from UniSteer It is designed to replace the factory steering rack all the way to the spindles. Please choose the correct model for your application below. It is backed by a limited lifetime warranty as well. If you don't see the correct application in the drop down below, please call in, so we can special order it for your a-arm length. ADD TO YOUR SHOPPING CART       Model 2008 RZR - Part #130 2009-2010 RZR - Part #280 2009-2010 RZR S - Part #270 BASE PRICE: $439.00 QTY:

• RZR Steering Rack End  (75-51SUS16) The steering rack end could also be considered the tie-rod. It threads into the steering rack and extends out to the tie rod end. The LSR rack end was designed using a heavier grade steel with a larger ball diameter and increased taper to give it superior strength over the OEM parts. However the rack end is still designed to give under extreme force to help prevent the steering rack from breaking.   *Stock width rack end works with all stock or aftermarket suspension widths. *+8 width rack end is designed for the LSR XTR +8 kit ADD TO YOUR SHOPPING CART       Width Stock - Part #4 +8 ($10.00) - Part #5 BASE PRICE: $45.00 QTY:

• Frame Gusset Kit - Polaris Rzr  (51-133010) Weld on gusset kit for the Polaris RZR. Strengthens the suspension mounting points as well as the front suspension cross braces. CLICK HERE for Install Guide ADD TO YOUR SHOPPING CART       BASE PRICE: $125.00 QTY:

• RZR Rear OEM Shock Mount Support  (51-13304) This plate can either be bolted in or welded in place. It mounts on the back side of the OEM upper rear shock mount to prevent flexing or folding over of the shock tabs under heavy riding conditions or when using aftermarket suspension. Will not work with the LSR +8 suspension kit. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Flat Black ($15.00) - Part #3 Flame Red ($15.00) - Part #4 Silver Metallic ($15.00) - Part #5 Custom Color ($15.00) - Part #1 BASE PRICE: $60.00 QTY:

• RZR Front Upper Frame Support  (51-13303) This plate bolts or welds in across the two frame rails seperating the upper a-arm mounts. This prevents the frame from twisting or collapsing under heavy riding conditions or when using aftermarket suspension. The kit is available in bare steel to be welded in or powder coated for bolt in applications. All hardware is included. ADD TO YOUR SHOPPING CART       Finish Options Bare Steel Flat Black ($25.00) - Part #3 Flame Red ($25.00) - Part #4 Silver Metallic ($25.00) - Part #5 Custom Color ($25.00) - Part #1 BASE PRICE: $50.00 QTY: