Yamaha UTV » Rhino Accessories

• Trinity Racing Spindles - Rhino  (TR-2RZLSHDSW) Trinity Racing has engineered our their new Heavy Duty Racing Spindles to exceed industry standards in performance, durablity and quality. Stainless steel construction featuring 40 Rockwell rating verses our competitors 10. Made to handle higher impact loads and extreme racing conditions. Come in pairs. ADD TO YOUR SHOPPING CART       BASE PRICE: $635.00 QTY:

• Roll Cage Seat Belts - Simpson  (SIM-1B11P) All aftermarket roll cages require new seat belts. We prefer the Simpson belts for the quality and comfort. All belts are padded 5 point systems. Belts mount to the roll cage and stock lower seat belt locations. ADD TO YOUR SHOPPING CART       Colors Red - Part #IR Blue - Part #IB Black - Part #IP Platinum ( Silver) ($20.00) - Part #IK BASE PRICE: $99.00 QTY:

• Rhino Steering Rack End  (75-51SUS092) The steering rack end could also be considered the tie-rod. It threads into the steering rack and extends out to the tie rod end. The LSR rack end was designed using a heavier grade steel with a larger ball diameter and increased taper to give it superior strength over the OEM parts. However the rack end is still designed to give under extreme force to help prevent the steering rack from breaking. ADD TO YOUR SHOPPING CART       BASE PRICE: $45.00 QTY:

• Electra Steer Powersteering Kit Yamaha Rhino  (US-80515) Electra-Steer™ assist steering is the newest technology being used by the major automotive manufactures to replace hydraulic power steering and is now available to UTV enthusiasts. These units consist of an electric column and power control module that utilizes state of the art electronics. The result is significant reduction of manual steering effort. Electra-Steer™ is fast and easy to install. All kits include everything needed to simply bolt the unit onto the existing equipment. Basic hand tools are all that is typically needed. Electra-Steer™ is then connected to your 12-volt power source and you are ready to hit the trail. If you ever wanted an easier way to steer your UTV, this is the best set up. It will greatly help to reduce fatigue during those long rides, and in racing situations. You will be able to throw around your rhino easily with one hand, even in the sand! We use and recommend these kits on all of our racing UTVs for the best performance, and comfort! They are set up for the stock steering rack and compatable aftermarket racks, as well as the Rackzilla. Please choose the correct option below. ADD TO YOUR SHOPPING CART       Application OEM or equivalent Rack - Part #10 Rackzilla Rack - Part #20 BASE PRICE: $995.00 QTY:

• RackZilla Steering Rack for Yamaha Rhino  (US-8001) Here is a replacement heavy duty Rack and Pinion Steering Rack from UniSteer It is designed to replace the factory steering rack all the way to the spindles. Choose your options below, depending if you are running a stock suspension system, or wider a-arms. It is backed by a limited lifetime warranty as well. ADD TO YOUR SHOPPING CART       Suspension Type Stock - Part #100 +3 MTS - Part #200 +6.5 XTR - Part #210 BASE PRICE: $439.00 QTY:

• Rhino Brembo Brake Upgrade Kit, 14 inch Wheels  (QTM-7601X) Brembo Front Big Brake Kit for your Yamaha Rhino from QTM A must if you are doing a high performance engine swap to be able to slow your Rhino down reliably. Decrease stopping distance, increase pedal feel, and get much longer life from your brake pads. This kit is running 270mm oversized rotors and big brake caliper step off brackets. This kit requires the use of aftermarket wheels, 14" diameter wheels are minimum for this kit!! Fits 2004-2009 Yamaha Rhinos ADD TO YOUR SHOPPING CART       BASE PRICE: $499.00 QTY:

• Rhino Brembo Brake Upgrade Kit, 12 inch Wheels  (QTM-7600X) Brembo Front Big Brake Kit for your Yamaha Rhino from QTM A must if you are doing a high performance engine swap to be able to slow your Rhino down reliably. Decrease stopping distance, increase pedal feel, and get much longer life from your brake pads. This kit is running 220mm rotors. Fits 2004-2009 Yamaha Rhinos ADD TO YOUR SHOPPING CART       BASE PRICE: $399.00 QTY:

• Stainless Grill Insert W/ Star - Yamaha Rhino   These stainless grills are the easiest way to enhance the appearance of your Rhino. Made from stainless steel so they will not rust. Install in minutes. ADD TO YOUR SHOPPING CART       BASE PRICE: $65.00 QTY:

• Stainless Grill Insert W/ Multi-stars - Yamaha Rhino   These stainless grills are the easiest way to enhance the appearance of your Rhino. Made from stainless steel so they will not rust. Install in minutes. ADD TO YOUR SHOPPING CART       BASE PRICE: $65.00 QTY:

• Billet Steering Sleeve   Billet steering sleeve from Billet Equipped. Installs right onto stock Rhino. ADD TO YOUR SHOPPING CART       Finish Chrome Plated Black Anodized BASE PRICE: $65.00 QTY:

• Billet Light Switch Knob - Rhino   Billet Equipped light switch knob. Fits stock switch. ADD TO YOUR SHOPPING CART       Finish Chrome Plated Black Anodized BASE PRICE: $39.00 QTY:

• Billet Shift Knob - Rhino   Billet Equipped shifter. Fit stock Rhino. ADD TO YOUR SHOPPING CART       Finish Chrome Plated Black Anodized BASE PRICE: $90.00 QTY:

• Billet Steering Wheel   Billet Equipped steering wheel. Comes with all adaptor pieces to mount to the Rhino. ADD TO YOUR SHOPPING CART       Cap Color Chrome Black Anodized Style 4 Blade 3 Blade BASE PRICE: $330.00 QTY:

• Billet Rear View Mirror- Rhino   Billet Equipped rear view mirror. 3 section with brackets. ADD TO YOUR SHOPPING CART       Finish Chrome Black Anodized BASE PRICE: $250.00 QTY:

• Billet Stereo Deck Cover   Billet Equipped stereo covers help protect your stereo against water and sand from the front. ADD TO YOUR SHOPPING CART       Finish Black Anodized Chrome BASE PRICE: $245.00 QTY:

• Rear Gusset Plate - Rhino   This plate is designed to reduce rear frame flex which leads to chassis failure. It gives you two hook points for tieing down or pulling. The plate is lazer cut from heavy gauge chromoly steel. It bolts onto the rear a-arm mounts and includes new hardware. There is a special tab that mounts to the bottom of the rear differential that add sa significant amount of strength and reliability to the rear end. No drilling is required. ADD TO YOUR SHOPPING CART       Plate Finish Bare Steel Flat Black ($30.00) Silver Metallic ($30.00) Chrome ($150.00) Your Choice Of Color ($30.00) Year '04-'07 '08 BASE PRICE: $90.00 QTY:

• Front Gusset Plate- Rhino   The front gusset plate mounts behind the front bumper and supports the chassis, a-arms, and the front differential from flexing. ADD TO YOUR SHOPPING CART       Plate Finish Bare Metal Flat Black ($30.00) Custom Color ($30.00) Year '04-'07 '08 BASE PRICE: $90.00 QTY:

• Steering Rack End Sleeve Nut - Rhino   The sleeve nut is an extended nut that grips the threads and the taper to help strengthen the weak point on a LSR rack end. Any low point in a machined piece will be the weakest point of the part. Though the LSR rack ends are stronger than stock this just adds extra protection. Sleeve nut is sold individually and is made from steel and zinc coated for corrosion prevention. They will help on the OEM rack end, but not as much as the LSR rack end, as they are machined specifically for the LSR rack end. ADD TO YOUR SHOPPING CART       BASE PRICE: $14.00 QTY:

• Ball Joint - Heavy Duty Rhino   These ball joints are a direct OEM replacement for the Yamaha Rhino stock ball joints. They are made stonger by using all forged steel and the inner ball is larger to prevent seperation from the housing. Can be used in any arms that use stock ball joints. QTY. 1 ADD TO YOUR SHOPPING CART       BASE PRICE: $35.00 QTY:

• Carbon Fiber Driver Dash Cover - Yamaha Rhino  (ECI-YAM-1101C) Clearance! Driver side carbon fiber dash cover. Installs over the stock dash. ADD TO YOUR SHOPPING CART       BASE PRICE: $90.00 QTY:

• Carbon Fiber Dash Cover - Yamaha Rhino  (ECI-YAM-1102C) Clearance! High quality carbon fiber panels install right over the stock dash. Cover the center of the dash. ADD TO YOUR SHOPPING CART       BASE PRICE: $90.00 QTY:

• Padded Arm Rest   These new padded arm rests offer comfort, as well as a place to stick your favorite drink. Easily removeable using included Velcro fastening system. Available with or without Cup Holders, and Carbon Vinyl. Custom Color combinations are available. Please call for a quote. ADD TO YOUR SHOPPING CART       Colors and Configurations Black Std Vinyl, with out cup holers Black Std Vinyl, with cup holers ($10.00) Black Carbon Vinyl, with out cup holders ($10.00) Black Carbon Vinyl, with cup holders (pictured) ($20.00) Silver Carbon Vinyl, with out cup holders ($10.00) Silver Carbon Vinyl, with cup holders ($20.00) Blue Carbon Vinyl, with out cup holders ($10.00) Blue Carbon Vinyl, with cup holders ($20.00) Red Carbon Vinyl, with out cup holders ($10.00) Red Carbon Vinyl, with cup holders ($20.00) BASE PRICE: $89.95 QTY:

• Chassis Gusset Kits - Rhino  (51-131010) These gusset kits are weld in tabs that support and strengthen the weak points in the chassis. It concentrates mostly around the suspension and shock mounting locations. The kits are a must for racers and great for the aggressive enthusiast that is pushing their Rhino to the max. Note: 1) Installation is available - Please call 800-4LS-Race for details and pricing. ADD TO YOUR SHOPPING CART       BASE PRICE: $175.00 QTY:

• UTV Door Sticker - Red on Black  (36-25) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is Red on Black. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

• UTV Door Sticker - White on Black  (36-21) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is White on Black. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

• UTV Door Sticker - Black on White  (36-22) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is Black on White. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

• UTV Door Sticker - Blue on White  (36-24) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is Blue on White. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY:

• UTV Door Sticker - Green on White  (36-23) Lonestar Racing Logo sticker that is the perfect size for your UTV.  It is 20" long by 7" tall.  Is is a high quality glossy sticker that is cut out like the shape of the logo.  It is a great addition to your UTV to help stand out amongst the crowd.  The sticker is Green on White. ADD TO YOUR SHOPPING CART       BASE PRICE: $10.00 QTY: